115
DLITE
Faders
LED intensity
You can adjust the minimum LED intensity. This is the LED intensity when the fader is at its
bottom stop (0%).
To adjust the LED intensity
Press and hold SHIFT, press SETUP, and turn wheel 3 to set the minimum LED intensity.
Paging faders
See “Paging displays” page 8.
Fader modes
Dlite’s multi purpose faders work in three modes:
Wide - faders control channel levels.
Context - context sensitive, universal keys (UK) can be used to store and select objects.
2 Preset - use for manual playback.
Note: Dlite Compact has no faders.
To switch fader modes
Press MODE until the LED next to the required mode is on.
Note: 2-Preset and Wide modes have red LEDs. Context mode’s LED is green.
Context mode
In context mode, you can select using the UKs and preview objects using the fader.
Context mode can be locked for specific lighting objects, allowing multiple selections.
Previewing objects, turns on the dimmers for fixtures used by the object. Example: Group 1
contains all the even channels. Selecting the group on the UKs and bringing up the fader turns on all
the even channels. They are not available for editing.
To select objects
Example 2: Select scene 3.
1 When the faders are in context mode, press
SCENE.
2 Press the UK (Universal Key) 3.
Scene 3 is selected. Either load it to a playback or edit the scene.
See “Selecting fixtures using the universal keys” page 39.
To lock context mode and select objects
1 Press
SCENE or CHASE or QLIST twice.
To Next Page
Loading...