Compulite Dlite - Storing Qlists and Cues Using the Keypad, Touch Screen, or Uks

72
Compulite
Chapter 5
To store new QLists and cues directly on the crossfader
1 Select fixtures and set levels.
2 Press
STORE.
3 Press
SHIFT + QLIST.
4 Choose a number for the QList by selecting a number on the keypad.
5 Press the crossfader’s
SELECT key.
Cue Stored (#1.0) is displayed.
6 Continue storing cues by selecting fixtures, pressing
STORE, and then pressing the SELECT
key for the playback.
To store the next cue
Example: Cue 1, QList 1 is the current cue on the crossfader. Store the next cue in QList 1.
1 Select the fixtures.
2 Set parameter levels.
3 Press
STORE+.
Cue 2 is stored in QList 1.
Cue Stored (2.0) is displayed.
4 Optional - Press
GO to fade to cue 2.
To store a cue to the Qlist on the crossfader
Example: Store cue 25 to the QList loaded on the crossfader.
1 Select the fixtures and set levels.
2 Press
STORE.
3 Press
CUE and select 25 on the keypad.
4 Press
ENTER or STORE.
Cue Stored (#) is displayed.
OR
Use this quick procedure.
1 Select fixtures and set levels.
2 Press
STORE.
3 Press
3 on the keypad.
4 Press
ENTER or STORE.
Cue Stored (#3) is displayed.
Storing QLists and cues using the keypad, touch screen, or UKs
To store QLists and cue 1 using the keypad
Example: Store QList 3, cue 1
1 Select fixtures and set levels.
2 Press
STORE.