151
DLITE
Snaps
3 Select snap 4.
4 Press
ENTER or STORE.
Dlite requests confirmation.
5 Press
ENTER or STORE or tap OK.
Snap 4 is deleted.
Triggering snaps
Snaps have three trigger modes:
Forcing - The current playback loads are released and the incoming snap is loaded to all target
playbacks.
Merging - The playback loads in the active snap are not released. Playbacks that are empty in
the active snap, but have loads in the incoming snap are loaded.
Waiting - When playbacks are active (on), playback loads in the incoming snap wait in the
wings until the target playback is off.
Example:
Snap 1 - Scene 1 on playback 12
Snap 2 - Scene 2 on playback 11
Snap 3 - Scene 3 on playback 12
Note: All the playbacks are on.
Active
Snap
Incoming
Snap
Snap Triggering Mode What happens
Snap 1 Snap 2
Forcing
To trigger a forcing snap
SNAP, #, ENTER
Playback 12 is released.
Scene 2 is loaded to playback 11.
To Next Page
Loading...