Compulite Dlite - Using solo; Chases On-The-Fly

102
Compulite
Chapter 6
Use the soft button options to restart paused playbacks. See “Pause” on page 99.
Using Solo
When
SOLO is active (LED on), all playbacks are turned off and their output fades to zero and the
selected playback remains on. Output from the faders and the crossfader is not affected.
To use Solo
1 Press
SOLO.
Solo is displayed in the Page/Mode window.
2 Press the
SELECT key for one of the playbacks.
The selected playback remains on. All the other playbacks are turned off and their output
fades to zero.
3 Press
SOLO again to turn the playbacks back on.
Chases on-the-fly
Some chase settings can be changed on the fly.
To set chases for manual operation on-the-fly
Example: Set chase 5, loaded to playback 5, for manual operation.
1 Press .
2 Press the
SELECT key for playback 5.
3 Now press the flash key to advance the chase by one step.
To cancel the manual operation
1 Press .
2 Press the
SELECT key for playback 5.
The chase returns to automatic playback.
To reverse chase direction on-the-fly
Example: Reverse the direction for chase 5, running on playback 5.
1 Press .
2 Press the
SELECT key for playback 5.
To reverse chase direction on multiple playbacks
1 Press and hold .
2 Press
SELECT for as many playbacks as is necessary.
To reverse chase direction on all playbacks
Press and hold SHIFT + .
Note: This reverses the cue sequence on the crossfader also.