Compulite Dlite - Moving Show and Device Files; Connecting; Sending Files

125
DLITE
Show and Device File Management
Moving show and device files
You can move files from a Dlite console to another Dlite console or to a PC to store back up files
for shows and devices.
Connecting
Sending files
To send show files
1 Press
SETUP.
2 Tap
SYSTEM OPTIONS.
3 Tap
I/O.
4 Select the show.
5 Tap
UPLOAD.
A message screen is displayed showing the IP address of the target console or PC and
whether the operation succeeded or failed.
To send device files
1 Press
SETUP.
2 Tap
SYSTEM OPTIONS.
3 Tap
I/O.
4 Tap
DEVICES and select the device.
5 Tap
UPLOAD.
A message screen is displayed showing the IP address of the target console or PC and
whether the operation succeeded or failed.
Connect from Connect to Ethernet cable IP address
Dlite console Dlite console Crossover Both consoles must have the
same network address.
Example: 91.xxx.xxx.xxx
Dlite console computer (PC) Crossover The console and the PC must
have the same network address.
Example: 91.xxx.xxx.xxx