Compulite Dlite - Saving Shows

120
Compulite
Chapter 8
Saving shows
You can save shows at any time during programming.
Save your show frequently during lighting sessions!
There three methods for assigning show numbers:
 Tap the appropriate number on the touch screen.
 Press the UK that corresponds to the show number.
 Enter a number on the keypad.
Shows can be saved to Dlite’s internal flash disk or to a USB stick. Giving shows meaningful text
names makes it easy identify the shows on the disk.
Tip! While programming, use different show numbers when saving the show. This
ensures that you always have a back up.
To save shows to the flash disk
Example: Save show 10.
1 Press
SETUP.
2 Tap
SAVE on the touch screen.
3 Select the show number.
4 Optional - press
TEXT and give the show a meaningful tag.
5 Tap
SAVE.
When the show is saved the message
Save Successful is displayed.
To save shows to the USB drive
Example: Save show 10.
1 Press
SETUP.
2 Tap
SAVE on the touch screen.
3 Press
USB DRIVE.
Dlite activates the USB drive.
4 Optional - press
TEXT and give the show a meaningful tag.
5 Select the show number.
6 Tap
SAVE.
When the show is saved the message
Save Successful is displayed.