101
DLITE
Playbacks and the Crossfader
To fade out scenes and chases
Press the playback’s OFF (SELECT) key.
OR
Move the playback slider to zero.
To flash scenes and chases
With the playback slider at zero, press the playback’s flash key.
Note: Enabling
LATCH, makes the flash key an ON/OFF key.
Global off control
The buttons
ALL OFF and CUT ALL OFF give you one press control over all the active playbacks.
ALL OFF - Fades the output from all active playbacks to zero in system time.
CUT ALL OFF - Bumps the output from all active playbacks to zero.
Global on/off commands for playbacks
To give global on/off commands to the playbacks
1 Press
PB.
2 Select a range of playbacks, # #.
3 Press
SHIFT + ON.
The selected playbacks begin their fades.
4 Pressing
SHIFT + ON stops the fades.
Pausing the playbacks
You can pause one or multiple playbacks at the same time.
To pause one playback
1 Press .
2 Press
SELECT for the playback you want to pause.
To pause multiple playbacks
1 Press and hold .
2 Press
SELECT for as many playbacks as is necessary.
To pause all playbacks
Press and hold SHIFT and press .
Note: This pauses the crossfader also.
Restarting paused playbacks
Pressing changes the soft buttons available on the touch screen.
To Next Page
Loading...