171
Appendix A Automated Playback
SMPTE (see page 171)
MIDI (see page 173)
Sound-to-Light (see page 174)
SMPTE
SMPTE time codes can be used to trigger automatic playback of scenes, chases, and cues.
The SMPTE trigger originates from an external SMPTE source or the internal SMPTE clock.
The frames per seconds default is 30 frames per seconds.
Setting up Dlite for SMPTE operation
Using the SMPTE clock
The internal SMPTE clock is used in conjunction with the Teach function to assign SMPTE time
codes and for playback.
To use the internal SMPTE clock to teach SMPTE triggers for playback the SMPTE function must
be turned on. If it is not turned on the system ignores the SMPTE time clock even though it is
running.
To enable SMPTE operation
1 Press
SETUP.
2 Tap
SYSTEM OPTIONS.
3 Tap
I/O
4 Tap SMPTE.
5 Tap
ENABLE.
ENABLE appears on a dark field.
Button What it does
START CLOCK
The SMPTE clock begins counting from its current time.
STOP CLOCK
Tap to stop the clock. The clock stops at it s current time.
RESTART CLOCK
Resets the SMPTE clock counter to 0:0:0:0.
To Next Page
Loading...