Compulite Dlite - Storing Chases and Chase Steps Using the Keypad, Touch Screen, or Uks

78
Compulite
Chapter 5
To store chase steps on playbacks for Dlite Compact
1 Select fixtures and set levels.
2 Press
STORE.
3 Press
CHASE.
4 Press
PB.
5 Press the
SELECT key for the playback.
The editor is stored as a chase step.
6 Follow steps 1 though 4 to store more chase steps.
Each step is stored to the next step number.
Storing chases and chase steps using the keypad, touch screen, or UKs
To store chases and chase steps using the keypad
Example: Create chase 1 and store the editor as step 1. Step 2 is automatically stored.
1 Select fixtures and set levels.
2 Press
STORE.
3 Press
CHASE.
4 Press
1 on the keypad.
5 Press
ENTER or STORE.
Chase Stored (#) is displayed.
To store chases and chase steps using the touch screen grid
Example: Create chase 1 and store the editor as step 1. Step 2 is automatically stored.
1 Select fixtures and set levels.
2 Press
STORE.
3 Press
CHASE.
The touch screen switches to chase mode.
4 Tap cell 1 on the touch screen grid.
The chase and its two steps are stored.
5 Repeat procedure steps 1 through 4 to store more steps. Each time you tap the chase
number, the next step is saved. Dlite increments the current step by 1.
To store chases and chase steps using UKs
1 Select fixtures and set levels.
2 Press
STORE.
3 Press
CHASE.
4 With the faders in
Context mode, press the UK that corresponds with the chase number.
The chase and step 1 is stored.
5 Repeat procedure steps 1 through 4 to store more steps.