Compulite Dlite - Activating Spots; Setting Parameter Levels

42
Compulite
Chapter 3
Activating spots
CONTROL is a dedicated key for spot ignition, shut down, and reset.
To turn the lamp on
1 Select the spots.
2 Press
CONTROL.
3 The touch screen is now in control mode.
4 Tap
LAMP ON.
To turn the lamp off
1 Select the spots.
2 Press
CONTROL.
The touch screen is now in control mode.
3 Tap
LAMP OFF.
To reset spots
1 Select the spots.
2 Press
CONTROL.
The touch screen is now in control mode.
3 Tap
RESET.
IMPORTANT! The lamp on, lamp off, and reset are mapped to a dedicated control
channel by the device’s manufacturer.
Setting parameter levels
Channels usually have 1 parameter, usually dimmer. Spots contain more than one parameter. The
number and type of parameters controlled by a spot depends on the type of device.
Spot parameters are organized into parameter banks:
 Focus (F)
 Color (C)
 Beam (B)
Parameter bank Possible parameters
F(ocus) Dimmer, strobe, pan, tilt, movement speed
C(olor) Cyan, yellow, magenta, color wheels, color speed
B(eam) Focus, zoom, iris, gobo wheels, prism, gobo spin