97
Chapter 6 Playbacks and the Crossfader
This chapter includes:
About playbacks (see page 97)
Playing back scenes and chases (see page 99)
Playing back QLists (see page 103)
Playback behavior (see page 105)
Controlling fade rates (see page 106)
About the crossfader (see page 108)
About playbacks
Dlite runs scenes, chases, and QLists on its 20 playbacks.
Playback priority can be LTP (Latest takes Precedence) or HTP (Highest Takes Precedence)
according to fixture parameters definitions in the Device Builder.
Fading in and out of lighting objects on the playbacks is determined by the playback behavior. See
“Playback behavior” on page 105.
Playbacks can be configured to behave as a crossfader for cues and scenes. See “Playbacks as
crossfader” on page 104.
Dlite supports 72 snaps, which store the playback loads and the playback state for quick retrieval.
See “Snaps” on page 147.
Figure 25: A playback and its control keys
To Next Page
Loading...