Compulite Dlite - Moving Groups; Updating Groups

52
Compulite
Chapter 3
Moving groups
Renumber groups by moving a group to a new number.
ATTENTION! Automatically generated groups cannot be moved.
To move groups
Example: Move group 1 to group 11.
1 Press
EDIT.
2 Press
GROUP and select group 11 (the target group).
3 Press
SHIFT + COPY.
Move appears in the command line.
4 Tap group 1 (the source group) on the touch screen.
5 Press
ENTER or STORE.
6 Group 1 is now renumbered as group 11.
Updating groups
To add fixtures to groups
Example: Add fixture 15 to the group.
1 Press
EDIT.
2 Press
GROUP.
The touch screen shows the existing groups.
3 Select the group.
4 Press
CHAN, SPOT, or EXTRA to select the type of fixture.
5 Press +
(plus) and enter 15 on the keypad.
Or
Tap fixture 15 on the touch screen.
6 Press
UPDATE.
The message
Group Stored is displayed.
To remove fixtures from groups
Example: Remove fixture 15 from the group.
1 Press
EDIT.
2 Press
GROUP.
The touch screen shows the existing groups.
3 Select the group.
4 Press
CHAN, SPOT, or EXTRA to select the type of fixture.