166
Compulite
Chapter 12
Tools
Press SETUP > SYSTEM OPTIONS > TOOLS
In this menu, you can limit the access different users have to system functions.
By default there are two users:
Programmer - Programmers have access to all system features. Programmers can edit and
store show objects (libraries, scenes, cues, etc.).
Operator - Operators are limited to playback functions. Operators cannot edit or store new
show objects.
In/Out
Press SETUP > SYSTEM OPTIONS > I/O
The In/Out option controls:
Transmission and reception of VCs over Ethernet
Automatic playback using SMPTE
Automatic playback using MIDI
Automatic playback using Sound-to-Light
Enabling the console for master/slave operation
Chase Pattern
Set the chase pattern default for new chases. See “Chase patterns” on
page 80.
Spot Home Values
Designate a specific scene that is referenced when homing fixtures.
Fixtures or parameters not included in this home scene, default to home
levels as defined in fixture’s device file.
System Time
Used for all system controlled fades. For example, fading out playbacks or
clearing the editor by pressing
RESET.
Feature Description
Feature Sub menus Description
Config Users Change User
Enter the User password.
Define Password
Enter unique passwords for Programmer and User.
Enable
Password
Require passwords, by enabling this button.
When disabled, no passwords are required to access all
programming and playback functions.
Clear System Objects Only
Clear everything except the patch.
All Data
Clear everything, including the patch.
To Next Page
Loading...