Compulite Dlite - Storing Scenes Using the Keypad, Touch Screen, or Uks

69
DLITE
Programming Lighting Objects
To store specific scenes using the playbacks
You can specify the scene number when storing scenes on playbacks.
Example: Store scene 12 directly on playback 1.
1 Select fixtures and set levels.
2 Press
STORE.
3 Press
SCENE and press 12 on the keypad.
4 Press the
SELECT key for playback 1.
Scene Stored (#) is displayed.
Storing scenes using the keypad, touch screen, or UKs
To store scenes using the keypad
Example: Store scene 3.
1 Select fixtures and set levels.
2 Press
STORE.
3 Press
SCENE.
4 Press
3 on the keypad.
5 Optional - press
TEXT and type a text tag for the scene. See “Adding text tags to lighting
objects” on page 91.
6 Press
ENTER or STORE.
Scene Stored (#3) is displayed.
OR
Use this quick procedure.
1 Select fixtures and set levels.
2 Press
STORE.
3 Press
3 on the keypad.
4 Press
ENTER or STORE.
Scene Stored (#3) is displayed.
ATTENTION! This short procedure stores scenes only if there is no QList on the
crossfader.
To store scenes using the touch screen grid
Example: Store scene 3.
1 Select fixtures and set levels.
2 Press
STORE.
3 Press
SCENE.
The touch screen is now in scene mode.