111
DLITE
Playbacks and the Crossfader
Linking QLists
Linked Qlists run sequentially. When linked, the last cue in a QList fades to the first cue in the
linked QList when receiving the go command.
To link QLists
Example: Link QList 1 to QList 4.
1 Press
QLIST and press 1 on the keypad.
2 Tap
LINK.
3 Press
QLIST and tap QList 4 on the touch screen.
Link Stored is displayed on the touch screen.
To clear linked QLists
Example: Clear the link between QList 1and QList 4.
1 Press
QLIST and press 1 on the keypad.
2 Tap
CLEAR LINK.
3
Link Cleared is displayed on the touch screen.
To Next Page
Loading...