37
Chapter 3 Selecting Fixtures and Setting
Levels
This chapter includes:
Selecting fixtures (see page 37)
Activating spots (see page 42)
Setting parameter levels (see page 42)
Resetting and recalling the editor (see page 49)
About groups (see page 49)
Blind Editor (see page 55)
About selecting fixtures
Fixtures must be selected, to make them available for editing. Parameter levels for the selected
fixtures are output from the editor and comprise all or part of a lighting look. The lighting look can
be stored as a scene, a chase step, or a cue in a QList (see “Show objects” page 11).
Selecting fixtures
Fixture selections can be made on the touch screen grid on the touch screen, by pressing the faders
Universal Keys, using console keys, or on the external monitor.
Note: Although Dlite Compact has no faders, the playbacks’
SELECT keys can be used
to select objects.
Command line numerical default
A command line default can be set so Dlite recognizes the first number entered as a belonging to
the default fixture type. The command line default can be set for:
Spot selection
Channel selection
Extra selection
To Next Page
Loading...