122
Compulite
Chapter 8
Partial loading
You can choose to load only:
Access the buttons for effects, groups, patch+libraries by pressing SHIFT.
ATTENTION! If the patch in your current show is not identical to the patch in the source
show file, some of the objects may not load or may be irrelevant.
To load selected objects
1 Press
SETUP.
2 Tap
LOAD.
3 Select the show file by tapping its’ cell on the touch screen or pressing the corresponding
UK when the faders are in context mode.
4 Tap
PARTIAL LOAD.
The partial load options are displayed.
5 Tap an option.
The selected objects are loaded.
Merging shows
It is also possible to load two shows, merging the show data. Existing objects are not overwritten.
Example: Show file 1, which is loaded to the console, has QLists 1, 2, 3, 4, and 5. Show file 2 has
QLists 3, 4, 5, 6, and 7. Only QLists 6 and 7 will load from show file 2.
IMPORTANT! The patch must be identical in both shows.
To merge shows
Example: Load show 1 and show 2
1 Press
SETUP.
2 Tap
LOAD SHOW on the touch screen.
3 Select show 1 by tapping it on the touch screen or pressing the UK that corresponds to the
show number.
4 Tap
LOAD.
When complete, the message
Load Successful is displayed.
5 Press
SETUP.
Patch Group
Scenes Effects
Chases Patch + Libraries
QLists
To Next Page
Loading...