51
DLITE
Selecting Fixtures and Setting Levels
3 Press GROUP and select a group number using the touch screen grid, or, if the faders are in
context mode, the UKs.
The group is stored.
Tip! The selection order is saved with the group. Selection order controls how effects and
fan are applied to the selection.
Deleting groups
To delete groups
1 Press
DELETE.
2 Select the group or select more than one group:
GROUP # #.
3 Press
ENTER.
Dlite requests confirmation.
4 Press
ENTER again or tap OK.
OR
1 Press
DELETE.
2 Select the group on the touch screen grid.
Confirmation is requested.
3 Press
ENTER again or tap OK or tap DELETE again.
Copying groups
To copy groups
Example: Copy group 4 from group 2.
1 Press
EDIT.
2 Press
GROUP.
The
Group screen is displayed.
3 Select the target group - group 4.
4 Tap
COPY.
The message
Edit: Group 4 Copy from Group is displayed in the command line.
5 Select the source group 2 - on the keypad and press
ENTER.
Or
Tap cell 2 on the touch screen.
Or
Press UK 2 with the faders in
Context mode.
Group 4 is stored.
To Next Page
Loading...