Compulite Dlite - System Upgrades; Shutdown; Diagnostics

168
Compulite
Chapter 12
To enable VC transmission over Ethernet
1 Connect the Ethernet cable.
2 Turn on Dlite.
3 Press
SETUP.
4 Tap
I/O.
5 Tap
ETHERNET.
6 Click
ENABLE VC.
ENABLE VC appears on a dark field.
Dlite now transmits VC’s over Ethernet.
To stop VC transmission
1 Press
SETUP.
2 Tap
I/O.
3 Tap
ETHERNET.
4 Click
ENABLE VC.
ENABLE VC appears on a light field.
System upgrades
Shutdown
It is recommended to use this option to shut down application prior to switching off the power. This
action will extend the console’s battery life.
Diagnostics
Allows you to run a test for LEDs, keys, faders, and playback sliders.
To use the diagnostic program
1 Press
SETUP.
2 Tap
DIAG.
3 Press any key or move any slider.
System Option Description
SW Upgrd
Update the application software.
OS Upgrd
Update the operating system.
Panel Upgrd
Update the panel software.
Output Upgrd
Update the output controller.