Compulite Dlite - Deleting Fixtures; Patching External Dimmers

25
DLITE
Patching
Fixture channel 10 is now patched to DMX address 22.
Note: If you are overwriting DMX address, a warning message appears. Choosing No,
exits the procedure.
To return to 1-to-1 patch
1 Press
SETUP.
2 Tap
CREATE AND PATCH.
The touch screen is now in patch mode.
3 If necessary, tap
MORE....
4 Select the fixtures for patching by tapping the cells on the touch screen or using the keypad.
5 Tap
PATCH BY DIMMER.
6 Tap
1-TO-1.
The message
Patch Successful is displayed.
Deleting fixtures
To delete fixtures
1 Press
SETUP.
2 Tap
CREATE AND PATCH.
The touch screen is now in patch mode.
3 If necessary, tap
MORE....
4 Press
CHANNEL, SPOT, or EXTRA and select the fixtures for deletion by tapping their
cells on the touch screen grid or using the keypad.
5 Tap
CLEAR, on the touch screen, or press DELETE.
Patching external dimmers
Some spots use a separate external DMX address for dimming.
To patch external dimmers (spots)
Example: Patch DMX address 300 to spot 1 and DMX address 320 to spot 1.
1 Patch the spots using the patch wizard.
2 Tap
MORE....
3 Tap
PATCH BY DIMMER.
4 Select the fixtures that use external dimmers.
5 Tap
EXTERNAL ADDRESSES.
6 Choose addresses by tapping them.
7 Tap
SET.