Compulite Dlite - Page 36

24
Compulite
Chapter 2
To clear the patch by fixtures
1 Press
SETUP.
2 Tap
CREATE AND PATCH.
The touch screen is now in patch mode.
3 Tap
MORE....
4 Tap
PATCH BY FIXT.
You are prompted for a fixture number.
5 Select the fixture number by clicking its cell in the touch screen grid. If necessary, navigate
to the port and page where the fixture appears.
6 Tap
CLEAR.
The fixture channel DMX address is cleared. The fixture no longer appears in the live
display.
To clear the patch by dimmers
1 Press
SETUP.
2 Tap
CREATE AND PATCH.
The touch screen is now in patch mode.
3 Tap
MORE....
4 Tap
PATCH BY DIMMER.
You are prompted for a DMX address.
5 Select the DMX address.
6 Tap
CLEAR.
The selected DMX address is cleared.
To change DMX addressing
Example: Fixture channel 10 is patched to DMX channel 10. Patch it to DMX 22.
1 Press
SETUP.
2 Tap
CREATE AND PATCH.
The touch screen is now in patch mode.
3 If necessary, tap
MORE....
4 Tap
PATCH BY DIMMER.
You are prompted for a fixture channel number.
5 Select channel 10.
6 Tap
CLEAR.
Fixture channel 10’s DMX address is cleared.
7 Tap the new address. In this example, tap
22. If the required address does not appear on the
touch screen, use the arrow keys or the page wheel to page the DMX address display.
8 Tap
SET.