Compulite Dlite - Copying Parameter Levels from Console Output

89
DLITE
Programming Lighting Objects
To copy the level from a specific parameter and apply to a range of fixtures
Example: Copy the gobo setting from spot 1 in scene 2 to spots 1  10 in scene 5.
1 Press
COPY.
2 Press
SCENE and select scene 2.
3 Select spot 1.
4 Select the gobo parameter.
The level for all the selected parameter is copied.
5 Select spots 1  10.
6 Press
SCENE and select scene 5.
7 Press
ENTER or STORE or UPDATE.
The copied level is applied to the selected range of spots and stored.
Copying parameter levels from console output
Copy and paste all levels or levels for selected parameters from the stage output to the selected
fixture.
To copy and paste all levels from the stage output
Example: Scenes 1  3 are output from faders. Copy the levels from spot 1 to spots 10  15.
1 Press
COPY.
2 Press
SPOT and select spot 1.
3 Press
@.
4 Press
SPOT and select spots 10  15.
5 Press
ENTER.
All output levels for spot 1 are copied to the selected spots.
To copy and paste a single parameter from the stage output
Example: Scenes 1  3 are output from faders. Copy the pan (x) level from spot 1 to spots 10
 15.
1 Press
COPY.
2 Press
SPOT and select spot 1.
3 Select x by pressing its parameter wheel.
4 Press
SPOT and select spots 10  15.
Scene # Output from fader Output for spot 1
1 4 Dimmer Fl, X @ 65, Y@35
2 5 Cyan @ 30, Magenta @ 25
3 6 Gobo wheel @ (step) 9