158
Compulite
Chapter 11
Of course, these parameter scenes can be used as building blocks when programming lighting states
using the
INCLUDE ALL STAGE store option.
IMPORTANT! One-parameter scenes can contain as many fixtures as required, but
only one parameter.
To store a one-parameter scene
Example: Capture the color wheel at pink, for spots 1 through 12.
1 Press
SPOT and select spot 1 through 12.
2 Press
C to change the color parameter bank.
3 Move the wheel labelled
CWhl (color wheel) until pink appears in the moving light live
display.
4 Press
STORE.
5 Press
SCENE.
6 Select the scene number on the keypad and press
ENTER.
Or
Tap the scene number on the touch screen.
Or
With the faders in
Context mode, press the UK for the desired scene number.
Excluding or including parameters when storing objects
Parameters that are active in the editor can be excluded when storing a scene, cue, chase step, or
library. This is useful, for example, when programming a scene with color levels only, but obvi-
ously you need to bring up the dimmer to see what you are doing.
To exclude a parameter when storing an object
Example: Store a scene that contains only color parameters, excluding the dimmer parameter.
1 Select spots, turn dimmer on.
2 Press
C to switch to the color wheel bank and set color parameters levels.
3 Press
F(ocus) to return to the wheel bank.
4 Press the dimmer wheel to select the dimmer parameter.
5 Tap
EXCLUDE.
A tilde (
~), signifying that this parameter will not be included when storing the step,
appears next to the dimmer levels.
6 Store as an object using your preferred method.
The dimmer is not included in the stored object.
To Next Page
Loading...