73
DLITE
Programming Lighting Objects
3 Press SHIFT + QLIST.
4 Press
3 on the keypad.
5 Press
ENTER or STORE.
Cue Stored (#) is displayed.
To store QLists and cues using the touch screen grid
Example: Store QList 3, cue 1.
1 Select fixtures and set levels.
2 Press
STORE.
3 Press
SHIFT + QLIST.
The touch screen switches to QList mode.
4 Tap cell 3 on the touch screen grid.
Cue Stored (#) is displayed.
5 Repeat procedure steps 1 through 4 to store more cues. Each time you tap the QList
number, the next cue is saved. Dlite increments the current cue by 1.
To store QLists and cues using UKs
Example: Store QList 3, cue 1.
1 Select fixtures and set levels.
2 Press
STORE.
3 Press
SHIFT + QLIST.
4 With the faders in
Context mode, press UK 3 (for QList 3).
Cue Stored (#) is displayed.
5 Repeat procedure steps 1 through 4 to store more cues.
Each time you press the UK, the next cue is saved. Dlite increments the current cue by 1.
To store a point cue
Example: Insert cue 5.2.
1 Select fixtures and set levels.
2 Optional - select store options or
INCLUDE/EXCLUDE parameters.
3 Press
STORE
4 Press QLIST and select the QList number using the keypad.
5 Press
CUE and press 5, z, 2 on the keypad.
6 Press
ENTER or STORE or tap OK.
Cue Stored (#) is displayed.
To Next Page
Loading...