Compulite Dlite - Page 106

94
Compulite
Chapter 5
To set delay times
Example: Set a delay time for lighting object 1.
1 To set delay time for scenes: Press
SCENE and press 1.
To set delay time for cues: Press
QLIST and select the QList. Then press CUE and press 1.
To set delay time for chase steps: Press
CHASE and select the chase. Then press STEP and
press
1.
To set delay time for chases: Press CHASE and select the chase.
2 Press
TIME.
The fade time fields are displayed in time mode.
3 Tap
DELAY.
4 Turn wheel 2 until arriving at 6 (seconds).
Or
Enter 6 (seconds) on the keypad.
5 Press
ENTER or STORE or tap OK.
To set fade times for a range of lighting objects
Example: Set the same fade time for objects 15, or cues.
1 To set fade times for scenes: Press
SCENE and press 1 5.
To set fade times for cues: Press
QLIST and select the QList. Then press CUE and press 1
5.
To set fade times for chase steps: Press
CHASE and select the chase. Then press STEP and
press
1 5.
To set fade times for chases: Press CHASE. 1 5.
2 Press
TIME.
The fade time fields are displayed in time mode.
3 Select
FADE or DELAY.
4 Use the wheels to set the time.
Or
Enter the time, in seconds, on the keypad.
5 Press
ENTER or STORE or tap OK.
To set parameter bank fade times
Example: Set scene 4 to fade in over 15 seconds and set the beam bank to jump in (cut time).
1 Press
SCENE.
The touch screen is now in scene mode.
2 Select scene 4.
3 Press
TIME.
The
Overall (scene) field is active.