154
Compulite
Chapter 11
.
To grab all fixtures with dimmer output
1 Tap
ACTIVE.
All spots, channels, and extras that are output from playbacks and with dimmer levels
greater than zero, are selected.
OR
1 Press
SPOT.
2 Tap
ACTIVE.
All spots that are output from playbacks and with dimmer levels greater than zero, are
selected.
OR
1 Press
CHAN.
2 Tap
ACTIVE.
All channels that are output from playbacks and with dimmer levels greater than zero, are
selected.
OR
1 Press
EXTRA.
2 Tap
ACTIVE.
All extras that are output from playbacks and with dimmer levels greater than zero, are
selected.
To grab all parameters in a selection
1 Press
SPOT and select spots (example: # # + #).
2 Press
SHIFT + tap ACTIVE ALL.
Button What it does
ACTIVE
Grabs all fixtures and parameter levels output from playbacks or the crossfader
on the condition that the dimmer levels are greater than zero.
This button is available on the touch screen in idle and in fixture mode (after
pressing
SPOT, CHAN, or EXTRA).
See “all if active” on page 156.
ACTIVE ALL
Grabs all parameters and levels for the selected fixtures.
Access by pressing
SHIFT + ACTIVE in fixture mode.
See “Using store options” on page 155.
ACTIVE CALL
Grabs all fixtures and parameters that are output from playbacks or the cross-
fader.
Access by pressing
SHIFT in idle.
See “include all stage” on page 156.
To Next Page
Loading...