156
Compulite
Chapter 11
To change the store option default
1 Press
SETUP.
The
Setup menu opens.
2 Tap
SYSTEM OPTIONS.
3 Tap
DEFAULTS.
4 Tap
STORE OPTIONS.
Store option buttons are displayed.
5 Tap a store option.
The button now has a dark field.
6 Press
ENTER.
7 Tap
OK.
8 Tap
OK.
The selected store option is now the default behavior.
To use a store option on-the-fly
1 Use the editor, playbacks, and faders to set the lighting look.
2 Press
STORE or UPDATE.
The store options are displayed in the touch screen.
3 Select a store option.
Options What is stored
INCLUDE FADERS
Use the faders, in wide mode, to build a lighting state and include the
fader’s output when storing a new scene, cue, chase step, or library.
Note: Faders must be in wide mode. (see “Wide mode” page 116).
INCLUDE ALL
STAGE
Everything that comprises the stage picture is included when storing the
new scene, chase step, or cue. The output can originate from the cross-
fader, playbacks, faders, grab fader, and editor.
ALL IF ACTIVE For fixtures with more than one parameter and for channels with scrollers!
Even if only one parameter, has been edited, all the parameters are stored
in the new scene, chase step, cue, or library. This ensures that the lighting
look is reproduced no matter where the parameters were left after the last
playback or editing operation.
Example: Select spot 1, set a level for cyan. Storing a new scene using this
option includes all of spot 1’s parameters in the scene.
UPDATE SOURCE The update source option updates the output source only.
See, “To use the Update Source option” on page 157.
When
UPDATE SOURCE is selected all other options are ignored.
F (ocus libraries)
C (olor libraries)
B (eam libraries)
Chose the default store option for each library type:
BY FIXTURE -
INCLUDE ALL -
To Next Page
Loading...