54
Compulite
Chapter 3
2 Tap more than one group on the touch screen.
To remove a group from the selection
Press SHIFT + GROUP # to remove a group from the range selection.
To lock faders in group mode
In context mode, the faders can be locked for groups. The dimmers for the fixtures in a group
are output as long as the fader is off its bottom end stop and the faders are locked for groups.
1 Press
MODE until the LED next to context is on.
2 Double press
GROUP.
The command line shows:
>(G#) Group.
3 Press a UK to select a group or move a fader to raise the dimmer levels of the selected
fixtures.
To unlock groups on faders
Press SHIFT + GROUP.
OR
Exit context mode.
>(G#) Group is no longer displayed in the command line.
To select the active editor
Example: Some channels and spots are active in the editor. You want to select all of them.
1 Press
GROUP.
2 Tap
SELECT EDITOR.
All the fixtures in the editor are selected.
OR
Use the ACTIVE feature (see “Using Active to select fixtures” page 153).
To recall the last group selected
1 Press
GROUP.
2 Tap
LAST SELECTION.
OR
1 Press
GROUP.
2 Press z (dot).
To Next Page
Loading...