64
Compulite
Chapter 4
To apply libraries to selected fixtures
Example: Program scene 6 using color library 1.
1 Select a range of spots and set the dimmer levels.
2 Press
LIB.
3 Press
C to access the color libraries.
4 Select color library 1.
The color parameter levels are retrieved from the library.
5 Continue selecting fixtures and setting parameter using libraries or wheels.
6 Press
STORE.
7 Press
SCENE.
8 Choose number 6 on the keypad and press
ENTER.
Or
Tap number 6 on the touch screen.
Or
Press UK 6 with the faders in
Context mode.
To load library contents to the editor
This procedure loads the entire library to the editor. You can then use this as a base for
programming a new lighting object.
1 Press
F, C, or B to select the type of library
2 Using the keypad, select the library number.
3 Press
ENTER.
The library is loaded to the editor.
4 Optional - Edit the parameter levels.
5 Store as a new lighting object.
To update libraries while updating cues, scenes, and chase steps
Example: Update the x and y levels for spot 2 and update the position library.
1 Press
UPDATE.
2 Select the cue, scene, or chase step.
3 Select spot 2.
4 Change the x and y levels.
5 Press
ENTER. or UPDATE.
You are prompted to update the library.
6 To update the library, tap
YES. To save the x/y levels in this cue without updating the
library, tap
NO.
Note: If you choose
NO, the link to the library is lost.
To Next Page
Loading...