Develop ineo 350 - Settings in the User Setting; Users Choice 1;6

Field Service Ver. 1.0 Aug. 2005 9. Utility/Counter Mode
117
bizhub 200/250/350Adjustment / Setting
9.3 Settings in the User Setting
9.3.1 User’s Choice 1/6
A. Mixed Original Detection
B. Language Selection
C. Measurement Unit Setting
D. Machine Authentication PW Change
Functions
• To set whether or not the Mixed Original Detection function is selected when the screen
shifts to the initial one.
Use • To set Mixed Original Detection as the default.
Setting/
Procedure
• The default setting is “OFF”.
ON “OFF”
Functions • To select the language of the Touch Panel messages.
Use • To change the language of the control panel display to the corresponding language.
Setting/
Procedure
• Select the language, and then touch [Enter] to set the language.
<For U.S.>
Japanese “English” French Spanish
<For Europe>
Japanese “English” French Spanish
German Italian
Functions
• To select the unit displayed on the LCD display.
• Available only in machines for U.S.
Use • To change the unit displayed on the control panel.
Setting/
Procedure
• The default setting is “Inch (Fraction)”.
“Inch (Num. Value)” Inch (Fraction)
Functions • The password entered for machine authentication with user authentication can be
changed.
• Available only when the machine authentication setting is made.
Use
Setting/
Procedure
[Current Password]: Type in the currently specified machine authentication password.
[New Password]: Type in the new machine authentication password.
[Confirm New Password]: Type in the new machine authentication password again for
confirmation.