Develop ineo 350 - Fax Connection Error; Service Call Set; Settings in the FAX Set; Settings in the Function

Field Service Ver. 1.0 Aug. 2005 9. Tech. Rep. Mode
33
FK-503Adjustment / Setting
9.5.5 Fax Connection Error
9.6 Settings in the Function
9.6.1 F7-2
9.7 Settings in the FAX Set
9.7.1 Service Call Set
• When a set condition takes place, the status of the machine is automatically notified to
the call center.
A. Maintenance Date/Toner Type
B. Service Destination
Functions • To display or clear the count of the number of errors occurred during fax transmission.
Use • Transmission Error: Counts fax transmission errors
• Receive Error: To count fax reception errors
Setting/
Procedure
Checking the counter reading
☞ 32
Clearing the counter reading (all and a specific one)
☞ 32
Functions • To automatically adjust the Original Size Detecting Sensor. (only for a FAX)
Use • When the Original Size Detecting Sensor is replaced
• When an optional sensor is mounted
Setting/
Procedure
1. From the Tech. Rep. mode menu, touch [Function] and [F7-2], in that order.
2. Place fives sheets of A3 paper, one on top of another, on the Original Glass and lower
the Original Cover.
3. Press the Start key to let the machine start the adjustment procedure.
4. The adjustment procedure is automatically terminated as soon as the required adjust-
ment has been made.
Functions
• To set the maintenance date and type of toner.
Use
Setting/
Procedure
<Toner Type>
• The default setting is “14k”.
5k “14k”
<Maintenance Date>
• Enter [Year], [Month], and [Day].
Functions
• To set the telephone number and communication mode.
Use
Setting/
Procedure
1. Touch [Service Destination] and enter the telephone number of address (up to 64 dig-
its can be entered).
2. Touch [Change Comm. Mode] and select the communication mode.
[FAX]: G3-1, G3-2
[InternetFAX]: InternetFAX
[PC]: E-Mail