Develop ineo 350 - Initial Setting; Settings in the Admin. Management

6. Utility/Counter Mode Field Service Ver. 1.0 Aug. 2005
18
FK-503
Adjustment / Setting
6.5 Settings in the Admin. Management
• The Admin. Management will be available by entering the administrator password (8 dig-
its) set by the Admin. Set . (The administrator password is initially set to “00000000”)
6.5.1 Initial Setting
A. Date & Time Setting
B. Language for Communication
C. Self-Telephone # information
D. TSI Registration
E. Self-ID
Functions • To set time and date for the fax machine.
Use • When setting or changing the time and date set for the fax machine.
Setting/
Procedure
• Enter the day, month, and year, and time-of-day from the 10-Key Pad.
• Touch [Enter] to start the clock.
Functions • To set the language used with the fax machine.
Use • To change the language used with the fax machine.
Setting/
Procedure
• The default setting is “English”.
Japanese “English”
Functions
• To register information required for fax communication, including the telephone number
of the local fax machine, whether or not a PBX is available, and the type of line.
Use
Setting/
Procedure
1. Touch the [PBX Connection Mode].
2. Touch [Self-telephone #] and enter the telephone number.
3. Touch the [PBX Connection Mode].
[Extension]: If a connection is made via the PBX to the ordinary fixed line
[Outside]: If a connection is made directly to the ordinary fixed line
* If [Extension] is selected, enter the Outside Line Access Code.
4. Touch the [Dial Method].
[DP20]: 20 pps pulse dialing line
[DP10]: 10 pps pulse dialing line
[PB]: Tone dialing line
Functions • To set the name (of the sending party) to be notified to the recipient.
Use • When changing the name (of the sending party) to be notified to the recipient.
Setting/
Procedure
• Up to eight different names can be registered.
1. Touch the [TSI Registration].
2. Select the number, for which the sending party is to be registered.
3. Enter the name of the sending party and touch [Enter].
Functions • To register the name, telephone number, and other information of the local machine as
an ID.
Use • When the ID is to be printed on journals and displayed on the panel of the fax machine
on the receiving end.
Setting/
Procedure
1. Touch the [Self-ID].
2. Enter the local machine ID (up to 12 en-size characters) and touch [Enter].