Develop ineo 350 - Troubleshooting

Field Service Ver. 1.0 Aug. 2005 3. Troubleshooting procedures
7
Standard Controller
Troubleshooting
No. Symptom Probable cause Action
9 The pages are not
punched.
Printed pages may be fed out
without being punched if the
paper is loaded into the paper
source with an incorrect orienta-
tion.
Check the orientation setting.
10 The hole punch position is
not as expected.
The orientation setting is not cor-
rect.
Check the punch position on the
Layout tab of the printer driver
setup dialog box.
11 The form is not printed
properly.
Available computer memory
space is not sufficient.
Simplify the form to reduce the
data size.
12 The image is not printed
properly.
Available computer memory
space is not sufficient.
Simplify the image to reduce the
data size.
13 Paper is not fed from the
specified paper source.
Paper will not be fed from the
specified paper source if that
paper source is loaded with paper
of a different size or orientation.
Load the paper source with paper
of the appropriate size and orien-
tation.
14 The numbering function is
not performed.
The “Collate” (for Windows) or
“Collated” (for Mac OS X) check
box is selected on the print setup
dialog box.
Clear the “Collate” (for Windows)
or “Collated” (for Mac OS X)
check box.
15 Proof and Print is no be
performed.