Develop ineo 350 - Print Lists; Report Settings

6. Utility/Counter Mode Field Service Ver. 1.0 Aug. 2005
22
FK-503
Adjustment / Setting
B. Password Communication
(1) Communication Password
6.5.6 Print Lists
A. Setting List
6.5.7 Report Settings
A. TX Report
B. Activity Report
Functions • To allow a fax to be received only when there is a match in the password that has previ-
ously been registered on the transmitter and receiver ends.
Use • When using password reception
Setting/
Procedure
• The default setting is “00”.
“00” (Disabled) 01 to 99 (Enabled)
Functions
• To print information concerning the initial settings of the machine.
Use
Setting/
Procedure
1. Touch the [Print Lists].
2. Touch the [Setting List].
3. The setting list is printed.
Functions • To set the mode of output of the report used for confirming results of transmission.
Use • When changing the mode of output of the report used for confirming results of trans-
mission
• Setting is made individually for a single destination and two or more destinations.
Setting/
Procedure
<Single Dest>
ON “If TX Fails” OFF
<Broadcasting>
ON “If TX Fails” OFF
Functions • To select whether or not to print the activity report for every 50 transactions automati-
cally.
Use • When printing the activity report for every 50 transactions automatically.
Setting/
Procedure
• The default setting is “ON”.
“ON” OFF