9. Utility/Counter Mode Field Service Ver. 1.0 Aug. 2005
118
bizhub 200/250/350
Adjustment / Setting
9.3.2 User’s Choice 2/6
A. Default Setting Simplex/Duplex
B. Auto Paper/Auto Zoom
C. Priority Tray
D. Special Paper Setting
E. Zoom Ratio for Combine Booklets
Functions • To set the default copy mode selected when the screen shifts to the initial one.
Use • To change the default copy mode selected when the screen shifts to the initial one.
Setting/
Procedure
• The default setting is “1 → 1” if “Simplex/Duplex” is “Simplex & Duplex” that is accessed
by the following: Tech. Rep. Mode → [Tech. Rep. Choice] → [System Set] → Simplex/
Duplex.
1→22→21→1
• The default setting is “1 → 2” if “Simplex/Duplex” is “Duplex Only” that is accessed by
the following: Tech. Rep. Mode → [Tech. Rep. Choice] → [System Set] → Simplex/
Duplex.
1→22→2
Functions • To set the default Auto mode selected when the screen shifts to the initial one.
Use • To change the default Auto mode selected when the screen shifts to the initial one.
Setting/
Procedure
• The default setting is “Auto Paper Select”.
“Auto Paper Select” Auto Zoom Manual
Functions
• To select the priority paper source that is selected when the copier is set to [Auto Size]
or [Manual].
Use • To set a priority paper source.
Setting/
Procedure
• The default setting is “Tray 1”.
“Tray 1” Tray 2 Tray 3 Tray 4
Functions • To specify the type of paper used in each paper Tray.
Use • To set the type of paper used in each paper Tray.
Setting/
Procedure
• The default setting is “Normal”.
“Normal” 1-Sided only Recycled Special Paper
Functions
• To select whether or not to call up an optimum zoom ratio automatically when the 2in1,
4in1, or Booklet function is selected.
Use
• To set so as to call up an optimum zoom ratio automatically when the 2in1, 4in1, or
Booklet function is selected.
Setting/
Procedure
• The default setting is “Recall”.
“Recall” Do Not Recall
•4in1: ×0.500
• 2in1/Booklet: ×0.647 <For U.S.>
2in1/Booklet: ×0.707 <For Europe>
To Next Page