Field Service Ver. 1.0 Aug. 2005 7. Test Mode
27
FS-508/PU-501/OT-601Adjustment / Setting
7.2 Function Modes
1: Staple unit CD movement mode
• Returns the Staple Unit to the predetermined position after it moves to the 2-point sta-
pling position for A4.
→ Moves from the predetermined position to the inner 2-point stapling position for A4.
→ Moves from the starting position and stops after the predetermined time.
→ Moves to the front of A4.
→ Moves from the starting position and stops after the predetermined time.
→ Moves to the predetermined position.
→ The operation is finished.
2: Aligning movement mode
• Aligning Plates 1 and 2 return to the predetermined position after moving to the aligning
position for A4R.
→ Moves from the predetermined position to the second predetermined position for A4R.
→ Stops after the predetermined time.
→ Moves to the aligning position for A4R.
→ Stops after the predetermined time.
→ Moves to the predetermined position.
→ The operation is finished.
3: Elevator Tray ascent operation mode
• The Elevator Tray is raised to mailbin 1. (Mailbin 1 → Additional Mailbin → Mailbin 2)
→ The Exit opens.
→ The Shutter closes.
→ The Paper Output Tray is raised to mailbin 1.
→ The Shutter opens.
→ The Exit closes.
→ The operation is finished.
4: Elevator Tray descent operation mode
• The Elevator Tray is lowered from mailbin 1. (Mailbin 2 → Additional Mailbin → Mailbin 1)
→ The Exit opens.
→ The Shutter closes.
→ The Paper Output Tray is lowered from mailbin 1.
→ The Shutter opens.
→ The Exit closes.
→ The operation is finished.
5: Punch Unit movement mode (appears only when the Punch Kit PU-501 is installed)
• The punch is driven once at a standard hole.
→ The operation is finished.
7: Exit open/close mode
• Opens and closes the Exit.
→ The Exit opens.
→ Stops after the predetermined time.
→ The Exit closes.
→ The operation is finished.
To Next Page
Loading...
