Field Service Ver. 1.0 Aug. 2005 6. Utility/Counter Mode
17
FK-503Adjustment / Setting
6.4 Settings in the User Management
6.4.1 Line Monitor Sound
6.4.2 Memory RX ON/OFF
6.4.3 POP3 RX
Functions
• To set the volume of the line monitor sound that can be heard from the monitor speaker
during fax transmission.
Use
Setting/
Procedure
• The default setting is “3”.
0 (mute) to 5
Functions
• To allow the machine to produce a print temporarily even in the off mode.
• A print control password is necessary to print data.
Use
Setting/
Procedure
1. Touch the [Memory RX ON/OFF].
2. Type the 4-digit password (default value: 1111) and touch [Enter].
3. Touch the [Lock OFF].
4. To halt the print cycle, touch [Lock ON] and then [Enter] while the print cycle is being
run.
5. Touch [Temporarily Print] to resume the print cycle.
Functions
• To check reception from the POP3 server.
Use
Setting/
Procedure
1. Touch the [POP3 RX].
To Next Page
Loading...
