Develop ineo 350 - Page 546

Field Service Ver. 1.0 Aug. 2005 1. Product specifications
1
DF-605General
General
1. Product specifications
A. Type
B. Functions
C. Paper type
*1: For the Combined Original Detection Mode, Refer to the Mixed Original Detection
Enabled Size Combination Table.
Name Reverse Automatic Document Feeder
Typ e
Paper Feed Paper Feed from top of stack
Turnover Switch back system
Paper Exit Straight exit system
Installation Screw cramp to the main unit
Document Alignment Center
Document Loading Left image side up
Modes 1-Sided Mode / 2-Sided Mode
Type of Document
Standard Mode
Plain Paper
1-Sided Mode
35 to 128 g/m
2
(9.25 to 34 lb)
2-Sided Mode
50 to 128 g/m
2
(13.25 to 34 lb)
Mixed Original Detection
Mode
Plain Paper
1-Sided / 2-Sided Mode
50 to 128 g/m
2
(13.25 to 34 lb)
FAX Mode
Plain Paper
1-Sided Mode
35 to 128 g/m
2
(9.25 to 34 lb)
2-Sided Mode
50 to 128 g/m
2
(13.25 to 34 lb)
Detectable Document
Size*1
Metric area
B6R to A3
Inch area
5.5 × 8.5R / 5.5 × 8.5 to 11 × 17
Capacity 80 sheets (80 g/m
2
) or load height of 11 mm or less.