AS Autosampler Operator’s Manual
96 Doc. 065051-03 1/08
Two new commands are added to the program.
NOTE If the AS is in concentrate mode, you can also
enter separate aspirate and dispense syringe
speeds for the Concentrate, Reagent Prime, and
Reagent Flush functions. See Section 3.6.10
for
details about concentrate mode.
NOTE The SyringeSpeed command shown in the
program in Figure 3-34
, controls the speed for
various minor autosampler operations. For best
results, use the default setting of 3 for this
command.
Figure 3-34. Syringe Speed Commands in the Program
To Next Page
Loading...
