208 Hog 4 Operations Manual
10.3 Media Picker - CITP Previews
By default the media picker displays previews for fixtures using a default preview package for
that fixture type as supplied by the fixture library. However, the media picker can also display
previews that have been downloaded and cached from connected CITP enabled fixtures. In
this section we will review which CITP clients are supported by the Hog 4 OS for previewing,
how to configure the DMX Processor for CITP fixture discovery, how to associate fixtures to
CITP media servers in the patch window, and finally how to use the patch window to refresh
CITP media preview packages.
10.3.1 Supported CITP Media Server Clients
Hog 4 OS supports the following CITP Media server clients:
Arkaos MediaMaster (software versions 3.2.2, 4.2.1, 5.0.1, 5.2.2, 5.3.1)
Coolux Pandoras Box (software version 4.7)
Green Hippo Hippotizer (software versions 3.2.1, 3.2.2, 3.2.3, 3.2.4, 4.2, 4.3, 4.4,
4.5)
High End Systems Axon / Axon HD (software version 2.1.2 or greater)
High End Systems DL.2 (software version 2.1.2 or greater)
High End Systems DL.3 (software version 2.1.2 or greater)
High End Systems DLV (software version 2.1.1 or greater)
High End MMS-100 (software version 2.1.1 or greater)
PRG Mbox Studio & Mbox Mini (software versions 3.6.1, 3.8, 3.9, 3.10, 4.3)
Disguise (d3 Technologies) Designer (software version 14 and 14.1 with Video
Modules v15, v16 )
10.3.2 Configuring Processors for CITP Discovery
In order for the console to properly discover CITP enabled fixtures on the FixtureNet network,
the FixtureNet adapter for the processor must be properly configured:
1. Open the node settings window for the processor that is connected via FixtureNet to
the CITP enable fixtures
2. Select the FixtureNet tab of the node settings window
3. Ensure that the IP address and subnet settings are appropriate for the network
environment in which the CITP discovered fixtures are connected. This is similar to
configuring the FixtureNet adapter for Art-Net and sACN output. To better ensure
connectivity it is recommended that the IP address assigned to the FixtureNet adapter
be within in the same sub-network as the CITP fixtures it is reeving preview thumbnails
from.
To Next Page
Loading...
