218 Hog 4 Operations Manual
11.2 Recording Options
11.2.1 Recording Selected Fixtures Only
Normally, recording a cue records the total contents of the Programmer or editor, but you can
choose to record only the currently selected fixtures. For example:
1. Select the fixtures that you want to record.
2. Re cord
3. Press Selected on the Record Options Toolbar.
4. Ch oose : records the selected fixtures as a new cue in the cuelist on the selected
master.
11.2.2 Record, Remove Values from Cues
You can remove the contents of the Programmer or editor from a previously recorded cue. For
example, you might have made changes to a cue, and you want the changes to track through
subsequent cues (see Tracking for an explanation of tracking). To remove parameter values:
1. Ensure that the parameters that you want to remove are in the Programmer. The
parameter values do not matter, only that the parameters have values.
2. Re cord, Remo ve : the Remove button is on the Re cord O ptions Too lbar at the
bottom of the right-hand screen.
3. Cu e 5 , En ter : removes the selected parameter values from Cue 5.
To remove a whole fixture ensure that all parameters are selected. You can do this by
selecting the fixture and pressing the Tou ch button on the Main Toolbar.
11.3 Deleting Cues
To delete a cue:
1. Cu e 1 Delete : deletes Cue 1 in the currently chosen cuelist.
2. Click OK to confirm the delete.
Or:
1. List 1 Cue 1 Dele te : deletes cue 1 in cuelist 1.
2. Click OK to confirm the delete.
Tip: If you prefer not to be asked to confirm the delete action, select Don't Ask Me Aga in
in the confirmation window. You can re-enable the confirmation by going to Setup →
Prefe ren ces → Progra mming and selecting Confirm before de leting dire ctory
items.
You can delete a range of cues:
1. List 1 Cue 1 Th ru 4 Dele te : deletes Cues 1 to 4 in Cuelist 1.
2. Click O K to confirm the delete.
Tip: To delete a cue ‘cue only’, so that changes caused by deleting the cue don't track
through to later cues, see Deleting without Tracking Forward.
To Next Page
Loading...
