428 Hog 4 Operations Manual
25.4 Reverting DMX Channels to HogNet Control
To set a DMX channel or group of DMX channels back to values generated by Hog
programming:
1. Select the desired DMX channel cell in the DMX output window's spreadsheet (or
highlight a group of DMX channel cells)
2. Press the Set to Hog Net Inp ut button at the top of the window (the value will now be
displayed in black)
Tip: All DMX channel value changes made in the DMX output window are stored with the
show file and are persisted through log off / on as well as through show backups.
25.5 DMX Test
DMX Test allows users to temporarily set a DMX channel or group of DMX channels to a
custom "value" as set in the scroll box at the top of the window when the coordinating cells
are selected in the DMX output window:
1. Toggle on the Test button at the top of the DMX output window.
2. Select any DMX channel cell or group of DMX channel cells in the DMX output window
spreadsheet.
Tip: The DMX test feature can be used to perform a traditional "dimmer check" by toggling
on the Test button in the DMX output window, selecting a DMX channel cell in the
spreadsheet, and using the cursor left and right keys to go through the DMX channels for
that universe.
.
To Next Page
Loading...
