21. MIDI 391
21.4 MIDI Timecode
Up to 8 MIDI Timecode input devices can be mapped to a console (or Hog 4 PC). When MIDI
Timecode is received by a console or Hog 4 PC it is also automatically available to all
consoles connected to the show.
21.4.1 Configuring MIDI Timecode Input Devices
Follow these steps to connect and configure a MIDI timecode device on a console:
1. Connect the output end of a third party MIDI Timecode device to the "MIDI In" port on
the back of the console. If you are using an external USB MIDI device to receive MIDI
Timecode then connect the external USB MIDI device to one of the USB ports on the
console. Please note that only generic "USB MIDI Class" devices are supported. Any
USB MIDI devices that require proprietary drivers may work with Hog 4 PC as long as
the specific driver is installed on the Windows machine but these types of USB devices
that require specific drivers will not work with Hog 4 OS consoles.
2. Open the Network window. [Setup → Network]
3. Select a console from the list of devices in the network window and then press the
Settin gs button.
To Next Page
Loading...
