410 Hog 4 Operations Manual
23.4 Triggering Cues from LTC
Cuelist can be assigned to listen to a single LTC source. To select an LTC timecode source
for a cuelist:
1. Open → Choose : opens the Cuelist window.
2. Option s → Cuelist : go to the Cuelist pane of the Playback Options window.
3. Select LTC timecode source from the drop down list. Each source will have a node
name and an index.
4. Once you have chosen the timecode source ensure that the En able Timeco de button
is selected.
Tip: There is an En ab le Timecod e button in the Cuelist window, so you can easily enable
and disable timecode during programming and playback without having to open the
Playback Options window each time.
To trigger a cue from timecode:
1. Open → Choose : open the Cuelist window.
2. Select the Wait cell for the cue, and press Se t.
3. From the toolbar, select Timecode.
4. Enter a timecode value in hours, minutes, seconds and frames, in the form
h h / m m/ s s . f f , then press Enter.
As well as entering timecode values manually, you can use Hog 4 OS's learn timing function
to quickly associate timecode values with cues; see Learn Timing.
By default, cuelists will follow the incoming timecode, even if the timecode skips forwards or
backwards; generally, this is a useful behaviour as, for example, you might ‘rewind’ the
timecode during rehearsals to repeat a part of the show, and the cuelist will automatically go
to the correct cue. Sometimes you may want to prevent a cuelist going backwards if the
timecode goes backwards. You can do this using Trigger Forwards Only:
1. Open + Choo se → O ptio ns → Cuelist
2. Select Trigger Forwards On ly.
To Next Page
Loading...
