ETC Hog 4 PC - OSC Mappings

400 Hog 4 Operations Manual
22.4 OSC Mappings
22.4.1 OSC Playback Mappings
Hog 4 OS uses the following OSC paths for sending and receiving playback messages:
Hog 4 OS OSC Command Path Data
Go a Cuelist / hog / playback / go / 0 cuelist #
Go a specific cue in a list (goto) / hog / playback / go / 0 cuelist #.cue #
Halt a Cuelist / hog / playback / halt / 0 cuelist #
Resume a halted cuelist / hog / playback / resume / 0 cuelist #
Release a Cuelist / hog / playback / release / 0 cuelist #
Go a Scene / hog / playback / go / 1 scene #
Halt a Scene / hog / playback / halt / 1 scene #
Release a Scene / hog / playback / release / 1 scene #
Go a Macro / hog / playback / go / 2 macro #
Halt a Macro / hog / playback / halt / 2 macro #
Release a Marco / hog / playback / release / 2 macro #
22.4.2 OSC Midi Note Mappings
Hog 4 OS uses the following OSC paths for receiving Midi Note input:
For example, Hog 4 OS recognizes / hog / midi / on / 1 / 10 as "note on" for note 10 on
channel 1.
Hog 4 OS OSC Command Path Data
Midi Note On / hog / midi / on / channel # / note # velocity
Midi Note Off / hog / midi / off / channel # / note # velocity
Note: if velocity = 0, then message is treated as note off