33. Service 513
33.4 How to Add Rear Rack Ears to HPU
The following instructions describe how to assemble and attach the rear rack mounting
assembly kit (sold separately) to the HPU:
1. Attach the rail adapters to the rear chasis brackets using the 10-32 x .5 screws from the
kit. Note: the rack adapters have 4 screw holes to account for different rack depths but
only two screws are required for secure assembly.
2. Attach the rear chassis brackets to the rear of the HPU using two 6-32 x .25 screws per
bracket.
3. Use the remaining 10-32 x .5 screws to secure the HPU to the rear rails to a 19" rack
enclosure.
To Next Page
Loading...
