312 Hog 4 Operations Manual
17.2 Virtual Master Playback
You can run cuelists without assigning them to a physical master by using virtual masters.
An almost unlimited number of virtual masters running different cuelists can be in operation at
any one time.
You can operate virtual masters from directory windows or from the command line.
Tip: You can press List + Re lease to release all running cuelists playing back as virtual
masters.
17.2.1 Running Cuelists, Scenes, and Batches from the Directory
Windows
You can run cuelists, scenes, and batches from their respective directory windows using the
steps below:
Open the list, scene, or batch directory window.
For example to open the list directory window: Open + L ist or List, List
Make sure that the G uar d button at the top of the directory window is deselected. Now
pressing and releasing any button in the directory will play back that object as if Go had been
pressed. In addition, holding your finger down on the directory button is the equivalent of
holding that master's Choose key, which allows you to use the central playback controls to
act upon that virtual master.
The buttons in the directory are coloured to show the cuelist status:
Green: actively cross-fading
Red: paused in the middle of a cross-fade.
Purple: releasing.
Grey: overridden / stomped on by another cuelist or scene
Blue: active on stage and halted
Teal: active on stage, halted, and running effects.
Orange: actively marking values.
Dark Blue: active onstage, halted, and controlling fixtures that are assigned to a plot.
To Next Page
Loading...
