92 Hog 4 Operations Manual
4.1 Launch a New Show
To launch a new show:
1. Press the Laun ch New Show button in the start window.
2. Use the browser window to select the directory where you wish to store the show, give
it a name, and then press the finish button.
3. Congratulations! You are now running a new show file.
TIP: If the launch new show button is greyed out or unavailable make sure that the "run
server" option is checked in the start screen's settings window. If "run server" is checked
but the new show button is still greyed out then it's possible another console is running a
show on the same port on the network.
4.2 Launch an Existing Show
To launch an existing show press the Laun ch Existing Sh ow button in the start window to
launch the last launched show file. Alternatively you can press the Bro wse button to select
from existing shows on your console's hard drive, a USB flash drive, or a CD. Show files with
a icon are "ready to launch" existing show files. Show files that have a icon are
archived show files and will need to be extracted to the hard drive in order to load. The un-
archiving process is done automatically by the console but will slightly lengthen the amount
of time needed to launch the show.
4.3 Connect to a Network Show
To connect to a show already running on the network look at the "connect to show" section of
the start window. If a show is running on the network and on the same port number then it's
file name will show up on the button. Pressing the button will connect the console to that
show.
If "No Show found" is displayed on the button then it's possible your network settings may
need to be reconfigured in order to connect to a network show. First check the following :
Make sure your console is set to the same port number as the server console on the
network.
Check that your console's IP address settings are correct for that particular network
setup.
4.4 Change Currently Loaded Show
If you are logged into a show but want to change to a different show:
1. Setu p → Quit
2. Select L og Off.
3. In the Start window, either launch a new show or browse to launch an existing show.