390 Hog 4 Operations Manual
To send a MIDI note from the console:
1. Open the MIDI note window by holding the Open key on the front panel and select the
MIDI Notes button from the open toolbar; this button will be on page 2 of the open
toolbar for Hedge Hog 4 and Road Hog 4 consoles).
2. Create a new entry in the MIDI note window by filling out the fields located at the top of
the window and then press the Add button.
3. Select the comment macro field for any cue, scene, or page and press the Set key on
the front panel.
4. Select the MIDI note entry you created in Step 2 from the drop down menu and press
Enter. The comment macro will be prefixed with "MN" which indicates its a MIDI note
message followed by the name of the message.
5. When the cue / scene / page is executed the referenced MIDI note message will be
sent from all attached MIDI devices with Notes Out enabled.
To Next Page
Loading...
