11. Cue and Cuelists 237
11.12.3 Insert, Merge and Replace
When copying or moving a cuelist, if the destination location already has a cuelist in it, you
will be prompted with record options of Insert, Merge or Replace:
Insert: creates a new destination cuelist. The new cuelist will be assigned a free
location just before the one chosen, using a point number if necessary.
Merge: Incorporates the source information into the destination cuelist. If the cue
numbers are in both cuelists, the new parameter values of the cues will replace the old.
Replace: Overwrites the cuelist information in that destination.
If you are copying a cuelist, all three options are available. If you are moving a cuelist, only
the Insert option is available.
Tip: If you know that you are about to copy or move a cuelist to an existing destination, you
can pre-select Insert, Merge or Replace from the Record Options Toolbar. This appears
after you press the Record, Copy or Move keys.
To Next Page
Loading...
